Model 1011HSA hi lo drinking fountain with bottle filler barrier-free vandal-resistant drinking fountain and motion-activated bottle filling station uses a patented stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. This Hi lo Drinking Fountain with Bottle Filler  is outfitted with such protective features as vandal-resistant bubbler heads, waste strainers, and bottom plates, this electric water cooler is quick to discourage vandals.

• The fountains stainless steel valve body is the only one on the market machined from solid bar stock
• 18-gauge Type 304 Stainless Steel bowl assemblies mounted on 14-gauge Type 304 Stainless Steel wall brackets
• Vandal resistant components include the bubblers, bowls, buttons, drains and bottom plates
• Front access engineered waste plumbing with enough access room for water stop, electrical junction box, filter and drain connections
• LED lighted 12″ sensor operated bottle opening with quick 1.1 gpm fill rate and laminar flow with front access for changing filter
• 3000 gallon (11356 L) capacity, Electronic Lifecycle Control filter cartridge, with filter replacement indicator light. When filter expires, solenoid stops dispensing water to bottle filler
• Auto purge feature automatically cycles once every 24 hours, if no use, to assure a fresh water supply as well as trap integrity
• 100% lead-free waterways
• Display menu which shows sensor range adjustment, factory reset, software/firmware version readout and error readout, along with bottle counter showing number of bottles saved
• Vandal-resistant sensor resists scratching and water droplet fowling, and is separated from display for maintenance
• Easy maintenance with front fountain access to valve adjustment and cartridge replacement

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

View Back Access Only Model

Model 1001HSA.8 barrier-free vandal-resistant electric water cooler and bottle filling station provides 8 gph (30.3 L) chilled drinking water performance in an engineered stainless steel skin. This wall-mounted swirl bowl designed fountain offers the only all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Outfitted with such protective features as a vandal-resistant bubbler head, waste strainer, and bottom plates, this electric water cooler is quick to discourage vandals. Fountain and bottle filler advantages include:

• The fountains stainless steel valve body is the only one on the market machined from solid bar stock
• 18-gauge Type 304 Stainless Steel bowl assembly mounted on a 14-gauge Type 304 Stainless Steel wall bracket
• Vandal resistant components include the bubbler, bowl, button, drain and bottom plate
• Front access engineered waste plumbing with enough access room for water stop, electrical junction box, filter and drain connections
• LED lighted 12″ sensor operated bottle opening with quick 1.1 gpm fill rate and laminar flow with front access for changing filter
• 3000 gallon (11356 L) capacity, Electronic Lifecycle Control filter cartridge, with filter replacement indicator light. When filter expires, solenoid stops dispensing water to bottle filler
• Smart energy savings feature powers down refrigeration system after 2 hours of non-use and will automatically start again when used
• Auto purge feature automatically cycles once every 24 hours, if no use, to assure a fresh water supply as well as trap integrity
• 100% lead-free waterways
• Display menu which shows sensor range adjustment, factory reset, software/firmware version readout and error readout, along with bottle counter showing number of bottles saved
• Vandal-resistant sensor resists scratching and water droplet fowling, and is separated from display for maintenance.
• Easy maintenance with front fountain access to valve adjustment and cartridge replacement

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”. Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Model H1011.8P vandal-resistant electric ADA water cooler and bottle filler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. This wall-mounted swirl bowl designed fountain offers the only all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

• Optional 3000 gallon water filter available (model 6480)
• The fountains stainless steel valve body is the only one on the market machined from solid bar stock
• 18-gauge Type 304 Stainless Steel bowl assembly mounted on a 14-gauge Type 304 Stainless Steel wall bracket
• Vandal resistant components include the bubblers, bowls, buttons, drains and bottom plates
• 100% lead-free waterways
• 1 gpm (3.78 L) laminar flow bottle filler with in-wall mounting plate
• “Hi-lo” design allows for twice the users as regular fountains and suits the needs for various user heights
• Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
• Easy maintenance with front access to valve adjustment and cartridge replacement
• Designed to run at a low energy usage, this water cooler and fountain are assured to have a long-lasting life
• Laminar flow prevents splashing, keeping the drinking area contained and clean

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Model 1011HSA.8 barrier-free vandal-resistant electric water cooler and bottle filling station provides 8 gph (30.3 L) chilled drinking water performance in an engineered stainless steel skin. This wall-mounted swirl bowl designed fountain offers the only all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Outfitted with such protective features as vandal-resistant bubbler heads, waste strainers, and bottom plates, this electric water cooler is quick to discourage vandals. Fountain and bottle filler advantages include:

• The fountains stainless steel valve body is the only one on the market machined from solid bar stock
• 18-gauge Type 304 Stainless Steel bowl assemblies mounted on 14-gauge Type 304 Stainless Steel wall brackets
• Vandal resistant components include the bubblers, bowls, buttons, drains and bottom plates
• Engineered waste plumbing with enough access room for water stop, electrical junction box, filter and drain connections
• LED lighted 12″ sensor operated bottle opening with quick 1.1 gpm fill rate and laminar flow with front access for changing filter
• 3000 gallon (11356 L) capacity, Electronic Lifecycle Control filter cartridge, with filter replacement indicator light. When filter expires, solenoid stops dispensing water to bottle filler
• Smart energy savings feature powers down refrigeration system after 2 hours of non-use and will automatically start again when used
• Auto purge feature automatically cycles once every 24 hours, if no use, to assure a fresh water supply as well as trap integrity
• 100% lead-free waterways
• Display menu which shows sensor range adjustment, factory reset, software/firmware version readout and error readout, along with bottle counter showing number of bottles saved
• Vandal-resistant sensor resists scratching and water droplet fowling, and is separated from display for maintenance.
• Easy maintenance with front fountain access to valve adjustment and cartridge replacement

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”. Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Model 6480 drinking fountain bottle filler Filter kit includes a 3000 gallon carbon block filter, filter head, and mounting bracket. This kit allows filtration for virtually any drinking fountain or bottle filler. The filter reduces chlorine (taste and odor) and lead, and removes 99.99% of cysts. It is a carbon block filter cartridge with a service life of 1 year/3000-gallons (11356 L). Tested and certified by CSA against NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor) and against NSF/ ANSI Standard 53 for the reduction of lead and cysts.

• High traffic area ready with a 3000-gallon (11,356 L) capacity filter
• 1/4 turn filter head allows changing of filter without turning off water supply
• 3000 gallon carbon block filter reduces chlorine (taste and odor) and lead, and removes 99.99% of cysts
• Universal Drinking Fountain Bottle Filler Filter Kit will work with almost any fountain or bottle filler (Optional model 6603 for in-wall installations with no rear access)

The multi bubbler Haws 1435-1920W vandal-resistant enameled iron, drinking fountain with bottle filler incorporates patented stainless steel, push button activated, valve assemblies allowing for front access stream adjustments as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

• Optional 3000 gallon water filter available (model 6480)
• Only stainless steel valve body that is machined out of solid bar stock
• 100% lead-free waterways
• Vandal resistant components include the bubblers, buttons, drain and bottom plates
• 1 gpm (3.78 L) bottle filler laminar flow
• Easy maintenance with front access to valve adjustment and cartridge replacement
• Gleaming white enameled iron construction provides this fountain with a bullet proof durability hidden beneath its elegant appeal
• Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
• Triple bubbler heads locked to main bowl prevent against vandals and provide efficient water flow in high traffic areas
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

• Note: Enameled iron bowls are shipped without the hardware mounted. Hardware to be mounted by installer.

Model 6810W is an option for the 6800 in-wall support carrier produced after August of 2023. This custom-fit side drain port can be installed in the field to allow a waste drain to be installed outside of the carrier.

Model 1931 is a replacement sensor used for the motion-activated bottle filler portion of the Haws 1200 series water coolers. The vandal-resistant sensor resists scratching and water droplet fowling.

Model 6810 In-wall floor mounted fixture carrier: Two 2½” x 1½” x 1/8” thick structural steel uprights having 6” x 3″ x 3/8” thick welded steel 4-bolt floor flanges, supplied with ‘U’ bolts and hardware. For use in conjunction with Haws in-wall mounting plates 6700, 6700.4, 6710, 6715, 6717, or 6776, for extra heavy duty fixture support. Fits inside standard 2” x 4” wall construction. Suitable for use with either 3/8″ or 1/2″ concrete anchors (by others). Includes mounting holes for plumbing stub out bracket and electrical boxes, and a on-site custom-fit side drain port. This port can be placed at any height. Exceeds requirements when tested in accordance to ASME Standard A112.6.1M. Design was independently verified as suitable to meet HCAI and CBC anchor spacing requirements.

The Haws 1119FRP barrier-free Hi-Lo vandal-resistant drinking fountain and bottle filler incorporates fully engineered pneumatic operated freeze-resistant valve assemblies. Wall mounted design allows the 1119FR to be placed securely in multiple locations without taking up excess space. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging vandals.

• 18 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
• Vandal resistant components include the bubblers, buttons, drains and bottom plates
• In-wall 3/16″ thick steel mounting plates add extra wall support when mounting the fountains and bottle filler
• Valves are installed in an area where the temperature remains at a minimum of 50° F (10° C) so the fountain remains fully functional in freezing conditions
• Drip tray for bottle placement during filling
• 1 gpm (3.78 L) laminar flow bottle filler
• Beautiful satin finish resists stains and corrosion
• Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
• “Hi-Lo” design allows for twice the users as regular fountains and suits the needs for various user heights
• One-piece stamped bowls make for an aesthetically pleasing and durable design
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 1119FRB barrier-free Hi-Lo vandal-resistant drinking fountain uses fully engineered pneumatic operated freeze-resistant valve assemblies. Wall mounted design allows it to be placed securely in multiple locations without taking up excess space. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging vandals.

• 18 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
• Vandal resistant components include the bubblers, buttons, drains and bottom plates
• Valves are installed in an area where the temperature remains at a minimum of 50° F (10° C) so the fountain remains fully functional in freezing conditions
• Beautiful satin finish resists stains and corrosion
• In-wall 3/16″ thick steel mounting plate adds extra wall support when mounting the fountain
• Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
• “Hi-Lo” design allows for twice the users as regular fountains and suits the needs for various user heights
• One-piece stamped bowls make for an aesthetically pleasing and durable design

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 1109FRP barrier-free vandal-resistant drinking fountain and bottle filler includes fully engineered pneumatic operated freeze-resistant valve assemblies for continual use during winter months. Wall mounted design allows the unit to be placed securely in multiple locations without taking up excess space. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging vandals.

• 18 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
• Drip tray for bottle placement during filling
• In-wall 3/16″ thick steel mounting plate adds extra wall support when mounting the fountain and bottle filler
• Vandal resistant components include the bubbler, buttons, drain and bottom plates
• Valves are installed in an area where the temperature remains at a minimum of 50° F (10° C), this unit will assist the fountain in remaining fully functional in freezing conditions
• Flow is easily adjustable with supplied regulator valves
• Beautiful satin finish resists stains and corrosion
• Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
• One-piece stamped bowl makes for an aesthetically pleasing and durable design
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Trouble viewing this website?

Without an up-to-date browser, you may have trouble with some of our features.

Update Now

Edge

Firefox

Chrome