Model SP229.158 chrome-plated brass stay-open ball valve equipped with a stainless steel ball and stem. Special self-draining feature allows valve and connecting lines to eyewash to drain to prevent freezing. Full flow occurs with push on stainless steel flag. 1/2″ NPT inlet and outlet.

Model SP11FC is a Soft-Flo ABS plastic anti-surge eyewash head in Safety Green, with a built-in 1.2 gpm (4.5 L) automatic pressure compensation flow control. This assures a single, soft-and-steady stream of water for flowing water pressure ranging from 30 to 90 psi (2.1 to 6.2 bar). Flow control is easily accessible for cleaning. Supply: 1/4″ NPT.

Model SP12 is a soft PVC covered ABC plastic Soft-Flo, anti-surge eyewash head with 1/4″ NPT inlet and an inserted nozzle in orifice for use with portable tank eyewash units.

Model SP131 is a cap assembly with threaded cap and wide fill opening for easy filling, inspection and cleaning for the Haws gravity fed eyewashes.

Model SP140 is an 8′ (243.8 cm), 250 psi (17.2 bar) hose with a chrome-plated swivel fitting at one end to facilitate ease of operation.

Model SP142 is a 6′, 250 psi working pressure rated green rubber hose.

Model SP154DPDT is a flow switch for use with the 9001and 9001EXP alarms. Switch will activate at 2.4 gallons (9 L) per minute of flow. AC 125/250 volts, 5 amps; DC 30 volts, 3 amps; double pole, double throw. 1-1/4″ NPT inlet and outlet. Class 1, Division 1, Group B, C, D. UL Listed.

Model SP155 is a thermostat for the heat traced cable outdoor Models 8317CTFP and 8317CTFP.220V. It has hermetically sealed contacts. Opens (rising) at 62° F (17° C) and closes (falling) at 52° F (11° C).

Model SP157A is a scald protection bleed valve. Recommended for high ambient temperature locations where extreme heat or hot sun might cause internal water overheating. Flushes water through line when internal water temperature reaches 98° F (36.7° C) and closes at 95° F (35° C). Full open temperature is 105° F (40.6° C). 1/2″ NPT inlet and outlet.

Model SP158.8, retro-fit freeze valve kit contains the necessary components to replace the stainless steel freeze valve on Haws model 8300.158. This fully engineered freeze protection valve is constructed of a one piece brass body, and supplied with a removable cartridge for easy cleaning and maintenance. Automatic thermal actuator bleed valve opens when internal water temperature falls below 35° F (1.7° C) and closes completely when the water climbs back to 42° F (5.6° C) or above. 1/2″ NPTF inlet and outlet.

Model SP158B, fully engineered freeze protection valve is constructed of a one piece brass body, and supplied with a removable cartridge for easy cleaning and maintenance. Automatic thermal actuator bleed valve opens when internal water temperature falls below 35° F (1.7° C) and closes completely when the water climbs back to 42° F (5.6° C) or above. 1/2″ NPTF inlet and outlet.

Model SP158CTFP, retro-fit freeze valve kit contains the necessary components and insulation to replace the stainless steel freeze valve on Haws model 8317CTFP. This fully engineered freeze protection valve is constructed of a one piece brass body, and supplied with a removable cartridge for easy cleaning and maintenance. Automatic thermal actuator bleed valve opens when internal water temperature falls below 35° F (1.7° C) and closes completely when the water climbs back to 42° F (5.6° C) or above. 1/2″ NPTF inlet and outlet.

Trouble viewing this website?

Without an up-to-date browser, you may have trouble with some of our features.

Update Now

Edge

Firefox

Chrome