Eye Wash Sink Archives

6810 – In-Wall Carrier

Model 6810 In-wall floor mounted fixture carrier: Two 2½” x 1½” x 1/8” thick structural steel uprights having 6” x 3″ x 3/8” thick welded steel 4-bolt floor flanges, supplied with ‘U’ bolts and hardware. For use in conjunction with Haws in-wall mounting plates 6700, 6700.4, 6710, 6715, 6717, or 6776, for extra heavy duty fixture support. Fits inside standard 2” x 4” wall construction. Suitable for use with either 3/8″ or 1/2″ concrete anchors (by others). Includes mounting holes for plumbing stub out bracket and electrical boxes, and a on-site custom-fit side drain port. This port can be placed at any height. Exceeds requirements when tested in accordance to ASME Standard A112.6.1M. Design was independently verified as suitable to meet HCAI and CBC anchor spacing requirements.

6776 – In-Wall Mounting Plate for Hand Wash Sink

Model 6776 is an in-wall .188″ thick steel mounting plate which provides maximum support and facilitates for the installation of the Haws wall-mounted hand wash sinks. Mounted prior to the finished wall, this mounting plate allows the sink to be easily and quickly installed.

Steel construction provides a solid support system for Haws 7660 and 7661 sinks
Optional 6810 in-wall metal studs provide the optimal mounting strength
Measurements are 24″ W x 26″ H x .188″ (61 x 66 x .48 cm)

7661 – Hand Wash Sink with AXION Eye/Face Wash

Model 7661 barrier-free hand wash sink with eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.

30″ wide 14-gauge Type 304 Stainless Steel sink mounted on 14 gauge Type 304 Stainless Steel sink supports
Integral to the sink construction is the seamless 1-1/2″ male NPT drain with 1-1/2″ trap and tailpiece supplied
Motion-activated faucet operation (operating on 110VAC or battery power) for safety and peace of mind
Supplied with .5 gpm and 1.2 gpm laminar flow faucet nozzles, with an optional 2.2 gpm laminar flow nozzle available for higher flow applications
Safety mixing valve included supplies tepid water to the eyewash
Faucet mixing valve included supplies the faucet with an output temperature range of 90-140F
Eye/face wash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
Rounded sink edges lessen risk of injury and hinder both non-hygienic clutter and water pooling
Beautiful satin finish resists stains and corrosion
Easy access to the mixing valve, faucet solenoid valve, plumbing and drain through the large front panel

Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. CSA B125.1, and CSA B45.4 certified. NSF61, ASSE 1017 and ASSE 1070-2015 certified faucet mixing valve.

7660 – Hand Wash Sink with AXION Eye/Face Wash

Model 7660 barrier-free eye wash sink with eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.

24″ wide 14-gauge Type 304 Stainless Steel sink mounted on 14 gauge Type 304 Stainless Steel sink supports
Integral to the sink construction is the seamless 1-1/2″ male NPT drain with 1-1/2″ trap and tailpiece supplied
Motion-activated faucet operation (operating on 110VAC or battery power) for safety and peace of mind
Supplied with .5 gpm and 1.2 gpm laminar flow faucet nozzles, with an optional 2.2 gpm laminar flow nozzle available for higher flow applications
Safety mixing valve included supplies tepid water to the eyewash
Faucet mixing valve included supplies the faucet with an output temperature range of 90-140F
Eye/face wash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
Rounded sink edges lessen risk of injury and hinder both non-hygienic clutter and water pooling
Beautiful satin finish resists stains and corrosion
Easy access to the mixing valves, faucet batteries, plumbing and drain through the large front panel

6800 – In-Wall Carrier

Model 6800 In-wall floor mounted fixture carrier: Two 2½” x 1½” x 1/8” thick structural steel uprights having 6” x 3″ x 3/8” thick welded steel 4-bolt floor flanges, supplied with ‘U’ bolts and hardware. For use in conjunction with Haws in-wall mounting plates 6700, 6700.4, 6710, 6715, 6717, or 6776, for extra heavy duty fixture support. Fits inside standard 2” x 4” wall construction. Suitable for use with either 3/8″ or 1/2″ concrete anchors (by others). Includes mounting holes for plumbing stub out bracket and electrical boxes. Exceeds requirements when tested in accordance to ASME Standard A112.6.1M. Design was independently verified as suitable to meet HCAI and CBC anchor spacing requirements.

We want to hear from you!