The multi bubbler Haws 1435-1920W vandal-resistant enameled iron, drinking fountain with bottle filler incorporates patented stainless steel, push button activated, valve assemblies allowing for front access stream adjustments as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

• Optional 3000 gallon water filter available (model 6480)
• Only stainless steel valve body that is machined out of solid bar stock
• 100% lead-free waterways
• Vandal resistant components include the bubblers, buttons, drain and bottom plates
• 1 gpm (3.78 L) bottle filler laminar flow
• Easy maintenance with front access to valve adjustment and cartridge replacement
• Gleaming white enameled iron construction provides this fountain with a bullet proof durability hidden beneath its elegant appeal
• Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
• Triple bubbler heads locked to main bowl prevent against vandals and provide efficient water flow in high traffic areas
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

• Note: Enameled iron bowls are shipped without the hardware mounted. Hardware to be mounted by installer.

The multi bubbler Haws 1435-1920WHO vandal-resistant enameled iron, touchless drinking fountain with bottle filler incorporates a sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation on the bottle filler, and offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock on the fountain. It is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

• Optional 3000 gallon water filter available (model 6480)
• Only stainless steel valve body that is machined out of solid bar stock
• 100% lead-free waterways
• Vandal resistant components include the bubblers, buttons, drain and bottom plates
• 1 gpm (3.78 L) bottle filler laminar flow
• Gleaming white enameled iron construction provides this fountain with a bullet proof durability hidden beneath its elegant appeal
• Touchless operation for safety and peace of mind on the bottle filler
• 30-second obstruction time-out to reduce tampering of sensor
• Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
• Triple bubbler heads locked to main bowl prevent against vandals and provide efficient water flow in high traffic areas
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

• Note: Enameled iron bowls are shipped without the hardware mounted. Hardware to be mounted by installer.

The multi-bubbler Haws 1430-1920WHO vandal-resistant enameled iron drinking fountain and touchless bottle filler incorporates a sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation on the bottle filler, and offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock on the fountain. It is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging vandals.

• Optional 3000 gallon water filter available (model 6480)
• Only stainless steel valve body that is machined out of solid bar stock
• 100% lead-free waterways
• Vandal resistant components include the bubblers, buttons, drain and bottom plate
• 30-second obstruction time-out to reduce tampering of sensor
• Gleaming white enameled iron construction provides this fountain with a bullet proof durability hidden beneath its elegant appeal
• 1 gpm (3.78 L) bottle filler laminar flow
• Easy maintenance with front access to valve adjustment and cartridge replacement
• Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
• Dual bubbler heads locked to main bowl deter vandals and provide efficient water flow for twice the users as single bubbler fountains
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

• Note: Enameled iron bowls are shipped without the hardware mounted. Hardware to be mounted by installer.

The multi-bubbler Haws 1430-1920W vandal-resistant enameled iron drinking fountain and bottle filler uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustments as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging vandals.

• Optional 3000 gallon water filter available (model 6480)
• Only stainless steel valve body that is machined out of solid bar stock
• 100% lead-free waterways
• Vandal resistant components include the bubblers, buttons, drain and bottom plate
• Gleaming white enameled iron construction provides this fountain with a bullet proof durability hidden beneath its elegant appeal
• 1 gpm (3.78 L) bottle filler laminar flow
• Easy maintenance with front access to valve adjustment and cartridge replacement
• Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
• Dual bubbler heads locked to main bowl deter vandals and provide efficient water flow for twice the users as single bubbler fountains
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

• Note: Enameled iron bowls are shipped without the hardware mounted. Hardware to be mounted by installer.

The Haws 1501-1920WHO ADA vandal-resistant dual drinking fountain and touchless bottle filler incorporates a sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation on the bottle filler, and offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock on the fountain. It is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

• Optional 3000 gallon water filter available (model 6480)
• Only stainless steel valve body that is machined out of solid bar stock
• 100% lead-free waterways
• Vandal resistant components include the bubblers, buttons, drains and bottom plates
• 30-second obstruction time-out to reduce tampering of sensor
• White enameled-iron fountain design provides toughness for the worst of environments
• 1 gpm (3.78 L) bottle filler laminar flow
• Easy maintenance with front access to valve adjustment and cartridge replacement
• Beautiful white enamel fountain and powder-coated bottle filler combination brings pleasing aesthetics to any environment
• Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 1311-1920WHO ADA vandal-resistant drinking fountain and touchless bottle filler incorporates a sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation on the bottle filler, and offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock on the fountain. It is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

• Optional 3000 gallon water filter available (model 6480)
• Only stainless steel valve body that is machined out of solid bar stock
• 100% lead-free waterways
• Vandal resistant components include the bubbler, button, drain and bottom plates
• 30-second obstruction time-out to reduce tampering of sensor
• White enameled-iron fountain design provides toughness for the worst of environments
• 1 gpm (3.78 L) bottle filler laminar flow
• Easy maintenance with front access to valve adjustment and cartridge replacement
• Beautiful white enamel fountain and powder-coated bottle filler combination brings pleasing aesthetics to any environment
• Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 1501-1920W ADA vandal-resistant drinking fountain and bottle filler uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

• Optional 3000 gallon water filter available (model 6480)
• Only stainless steel valve body that is machined out of solid bar stock
• 100% lead-free waterways
• Vandal resistant components include the bubblers, buttons, drains and bottom plates
• White enameled-iron fountain design provides toughness for the worst of environments
• 1 gpm (3.78 L) bottle filler laminar flow
• Easy maintenance with front access to valve adjustment and cartridge replacement
• Beautiful white enamel fountain and powder-coated bottle filler combination brings pleasing aesthetics to any environment
• Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 1311-1920W ADA vandal-resistant drinking fountain and bottle filler uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

• Optional 3000 gallon water filter available (model 6480)
• Only stainless steel valve body that is machined out of solid bar stock
• 100% lead-free waterways
• Vandal resistant components include the bubbler, buttons, drain and bottom plates
• White enameled-iron fountain design provides toughness for the worst of environments
• 1 gpm (3.78 L) bottle filler laminar flow
• Easy maintenance with front access to valve adjustment and cartridge replacement
• Beautiful white enamel fountain and powder-coated bottle filler combination brings pleasing aesthetics to any environment
• Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Deck mounted sink units like the 4110ADA are installed in accessible countertop locations for quick locating and convenient operation. Sunken down sink design with water tight fit and stainless steel mounting rim helps to minimize excess splashing, keeping the drinking area contained.

• White acid-resistant enameled iron sink makes for one of the toughest mounting surfaces Haws produces
• Measurements are 24″ x 16″ x 5″ (61 x 40.6 x 12.7 cm)
• Mounted at the correct height and equipped with proper drinking fountain and faucet, this unit complies with the Americans with Disabilities Act requirements for drinking fountains

Specify one of the following gooseneck faucets to be installed left rear side:

Model 5510LF stay-open lever handle, polished chrome-plated brass gooseneck faucet,

Model 5452LF, self-closing lever handle polished chrome-plated brass gooseneck faucet, or

Model 5530LF stay-open, hot and cold lever handle, polished chrome-plated brass gooseneck faucet.

Specify the following bubbler to be installed on right front side;

Model 5054LF lever handle polished chrome-plated brass drinking faucet,

Model 5017LF push button polished chrome-plated brass drinking faucet with renewable cartridge and vandal resistant lock pin, or

Model 5051LF self-closing lever handle drinking faucet with a polished chrome-plated brass finish, adjustable stream flow, and vandal resistant lock pin.

The Haws 1311 vandal-resistant enameled iron, barrier-free drinking fountain uses a patented stainless steel, push-button activated, valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Low profile wall mounted design accommodates adult or child ADA capabilities. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging vandals.

• Optional 3000 gallon water filter available (model 6480)
• Only stainless steel valve body that is machined out of solid bar stock
• 100% lead-free waterways
• Vandal resistant components include the bubbler, button, drain and bottom plate
• Gleaming white enameled iron construction provides this fountain with a bullet proof durability hidden beneath its elegant appeal
• Easy maintenance with front access to valve adjustment and cartridge replacement
• Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
• Note: Enameled iron bowls are shipped without the hardware mounted. Hardware to be mounted by installer.

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The multi-bubbler Haws 1430 vandal-resistant enameled iron drinking fountain uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustments as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging vandals.

• Optional 3000 gallon water filter available (model 6480)
• Only stainless steel valve body that is machined out of solid bar stock
• 100% lead-free waterways
• Vandal resistant components include the bubblers, buttons, drain and bottom plate
• Gleaming white enameled iron construction provides this fountain with a bullet proof durability hidden beneath its elegant appeal
• Easy maintenance with front access to valve adjustment and cartridge replacement
• Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
• Dual bubbler heads locked to main bowl deter vandals and provide efficient water flow for twice the users as single bubbler fountains

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

• Note: Enameled iron bowls are shipped without the hardware mounted. Hardware to be mounted by installer.

The multi-bubbler Haws 1431 vandal-resistant enameled iron, wheelchair accessible drinking fountain uses patented stainless steel, push button activated, valve assemblies allowing for front access stream adjustments as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging vandals.

• Optional 3000 gallon water filter available (model 6480)
• Only stainless steel valve body that is machined out of solid bar stock
• 100% lead-free waterways
• Vandal resistant components include the bubblers, buttons, drain and bottom plate
• Gleaming white enameled iron construction provides this fountain with a bullet proof durability hidden beneath its elegant appeal
• Easy maintenance with front access to valve adjustment and cartridge replacement
• Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
• Dual bubbler heads locked to main bowl prevent against vandals and provide efficient water flow for twice the users as single bubbler fountains

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

• Note: Enameled iron bowls are shipped without the hardware mounted. Hardware to be mounted by installer.

Trouble viewing this website?

Without an up-to-date browser, you may have trouble with some of our features.

Update Now

Edge

Firefox

Chrome