Home / Products / 1922 – Vandal-Resistant Wall Mounted Bottle Filler w/Drip Tray Drain

1922

Vandal-Resistant Wall Mounted Bottle Filler w/Drip Tray Drain

Model 1922, vandal-resistant wall mounted stainless steel bottle filler with drip tray drain. The bottle filler and drain pan requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Spec Sheet Download

Spec Sheet

Operational / Maintenance Manual

Installation Drawing

Parts Breakdown Drawing

AutoCAD Installation Drawing

Limited Warranty

Specifications

Model 1922 wall mounted vandal-resistant bottle filler and drain shall include 100% lead-free waterways, satin stainless steel construction, 1 gpm (3.78 L) laminar flow, vandal resistant push-button operated stainless steel valve with front-accessible cartridge and flow adjustment, drip tray drain, vandal-resistant bottom plate, and stainless steel back panels (order models 1920 and 6468 if panels are not required). In extreme environments related to heat and cold, product(s) must be protected from damage/exposure due to these extreme conditions. This product requires mounting plates for the bottle filler and drain pan; either the 6700 in-wall or the 6700R on-wall support plate. (See options below) In extreme environments related to heat and cold, product(s) must be protected from damage/exposure due to these extreme conditions.

Touchless sensor upgrade available—call Customer Service at (888) 640-4297:
First sensor +$331

Pricing Information

$1366 USD
Contact Haws Specials

Vandal-Resistant Wall Mounted Bottle Filler w/Drip Tray Drain

Model 1922 vandal-resistant satin stainless steel bottle filler with drain uses a patented stainless steel push-button valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted bottle filler offers the 'only' all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. The drip tray captures all unused water and is sent down the drain.

Optional 3000 gallon water filter available (model 6480)
Only stainless steel valve body that is machined out of solid bar stock
Satin stainless steel finish
Vandal resistant components include the button, drain and bottom plate
Available steel wall mounting plate recommended
1 gpm (3.78 L) Laminar flow
Maintenance is made easy with front access to valve adjustment and cartridge replacement
If back panels are not required, order models 1920 and 6468
This product requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) "NSF/ANSI/CAN 61: Q ≤ 1".

Prop 65 Warning. For California Residents Warning: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. Please click here for more information.